X-Sensors Application; Programmable Keys; X-Safe - Crosscall CORE-T4 Manual De Instrucciones

Ocultar thumbs Ver también para CORE-T4:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 71
THE X-SENSORS APPLICATION
When opening the application (app) for the first time, please read the terms and conditions
of use and click on "Accept" to accept them before using the app.
This app gives you information about the sensors embedded in your tablet.
The magnetometer: This is the compass feature. It measures the tablet's orientation
relative to magnetic north. Calibrate your compass by following the instructions on the
screen.
The accelerometer: lets you measure and see the tablet's acceleration based on 3 axes.
Using mathematical integration, it measures the speed at which the device is moving as
well as tracking its position.
GPS: position of the device and accuracy of the GPS signal. You can find out the number
of satellites in range as well as your exact position.
Light sensor: measures the light reaching the tablet screen.
Bluetooth (4.2) and networks (2G, 3G, and 4G): show the presence and strength of
communication networks.
Battery status: provides an instant, visual indication of the battery's rate of charge/
discharge.

PROGRAMMABLE KEYS

In Settings > Buttons > choose the function you want to give those keys. For each button,
choose the « press action » and « press mode ».
By default, the grey key is programmed to launch photo app and the red key is programmed
to launch X-SAFE app.

X-SAFE

X-SAFE is an application embedded in the Crosscall 's tablet allowing to alert
someone in case of emergency.
STEP 1 : X-SAFE SETTINGS
1. Open X-SAFE application
44

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Core-x4Core-m4

Tabla de contenido