SKF TKRS 21 Instrucciones De Uso página 16

Fig. 6 – Laser activated
When laser is activated. The symbols
turn to red and the rpm value is
overruled by the laser. In case no
signal is detected "---" is shown.
Fig. 7 – No signal
14 EN
Options to activate laser
A) short press: < 0,5 sec:
click on /click off
B) press longer than 0,5 sec:
> laser is activated as long as
button is pressed;
laser is turned off after release
When laser is activated.
The symbols turn to red and the
rpm value is overruled by the laser.
By pressing the soft button again,
you stop the laser.
The display shows the min/max/avg.
Fig. 7 – Laser stopped