Troubleshooting; Spare Parts And Accessories - SKF TKRS 21 Instrucciones De Uso

6. Troubleshooting

Problem
Display is dirty
Menu is frozen
Too short
operating time

7. Spare parts and accessories

Designation
TKRT-RTAPE
TDTC 1/A
N O T E S :
Static images are produced when the lash frequency is identical to, or a
multiple or fraction of the frequency of the motion.
Solution
Use a wet cotton swab to clean the display area and a clean,
dry cotton cloth to remove any water remains.
Do not wash the display with too much water or solvents.
Remove the batteries and wait for 1 minute before placing
them back.
Start the device and check that everything works.
SKF TKRS 31: If the problem re-occurs, execute a factory
reset in the settings menu.
Replace batteries with new batteries.
Check if another brand offers better performance.
Do not store the stroboscope in very hot or cold
environments.
Turn on the auto off function or reduce the screen
brightness to conserve battery power.
TKRS 21 & 31
Relective tape (only on TKRS 31)
General toolcase without inlay, size A
EN 27