Festool VAC SYS SE Manual De Instrucciones Original página 12

Vacuum clamping unit VAC SYS SE
1 Symbols
Warning of general danger
Electric shock
Read the operating instructions/notes
Advice or tip

The specifi ed illustrations are at the beginning of
this operating manual.
2 Technical data
Vacuum pump end pressure abs.
Weight of vacuum clamping unit SE 1
Weight of vacuum clamping unit SE 2
Protection class
Holding force of the vacuum clamping unit
Holding force 90°
Suction
tilted (workpi-
1, 2
plate
ece vertical) [kg]
D 215 55
275x100 35
200x60 22
277x32 21
Maximum workpiece dimensions
Suction Maximum dimen-
plate sions [m]
1
D 215 1 x 1
275x100 1.2 x 0.4
200x60 0.8 x 0.2
277x32 1.2 x 0.08
Specifi cations for smooth surfaces such as PMMA (plexiglas
1
PF hard fi bre (Resitex) and worktops, not for MDF or similar
materials.
The holding force may decrease by up to 20% over the course
2
of the years. Values relate to a vacuum of 85% (150 mbar end
pressure) and include a safety factor of 2.
3 Machine features
[1-1] Mains connection
[1-2] On/off switch
[1-3] Vacuum gauge
[1-4] Ventilation slits
[1-5] Vacuum connection
[2-1] Slide valve
[2-2] Rotary knob for clamping the suction
[2-3]
[2-4]
[2-5]
[2-6]
4
The vacuum clamping unit VAC SYS SE is designed
for clamping objects with fl at, smooth, airtight
surfaces in combination with vacuum pump
VAC SYS VP.
The user bears the responsibility for damage and
accidents caused by improper use.
5
150 mbar
5.1
8.3 kg
- Before using the device, carefully read the safety
8.1 kg
/ II
Holding force
0° tilted
1, 2
(workpiece ho-
- Never allow children to use the device.
rizontal) [kg]
- Before using the device, make yourself suffi -
90
53
- Keep the working area clean and tidy. Untidy,
30
27
- Never operate the device in a potentially explo-
Maximum
weight [kg]
- Pay special attention to how you handle the
1
30
20
10
8
- Always use the device, accessories, etc. in
),
®
- When not in use, keep equipment out of the reach
- Maintain the device with care. Check whether
12
plate
Locking pin for suction plate
Clamp lever for tilting fi xture
Foot valve
Suction plate
Intended use
Safety instructions
General safety instructions
instructions, these operating instructions and
the operating manual accompanying the vacuum
pump VAC SYS VP all the way through. Keep all
of the accompanying documents and pass on if
the device changes ownership.
ciently familiar with the procedures for using,
setting and operating the device.
unlit working areas may lead to accidents.
sive environment containing fl ammable fl uids,
gases or dust. Electric motors generate sparks
that may ignite dust or vapours.
device and always proceed with care. Do not
use the device when you are tired or under the
infl uence of drugs, alcohol or medication. One
moment of carelessness during operation can
cause serious injuries.
accordance with these instructions and the
instructions accompanying this special device.
Also take into account the working conditions
and the job in hand. Using the device for appli-
cations other than those specifi ed may create
hazardous situations.
of children. Personnel should not be allowed to
use the device if they are not familiar with it or
have not read these instructions. Equipment or
machines operated by inexperienced personnel
may pose a serious health hazard.
moving components function correctly and do