Festool VAC SYS SE Manual De Instrucciones Original página 15

• To release the workpiece, hold with both hands
and actuate the foot valve [2-5].
• Remove the workpiece.
• After using the pump, switch off at the on/off
switch [1-2] and remove the plug from the power
socket.
8 Service and maintenance
WARNING
Risk of accident, electric shock
Always pull the plug out of the socket before
•
performing any type of work on the machine.
All maintenance and repair work on the pump
•
must be carried out by an authorised service
workshop only.
Customer service and repair. Only through
manufacturer or service workshops:
Please fi nd the nearest address at: www.
festool.com/Service
Use only original Festool spare parts! Or-
EKAT
4
der No. at: www.festool.com/Service
5
3
2
1
To ensure constant air circulation, always keep the
ventilation openings [1-4] on the pump container
clean and free of blockages. Clean the protective
grille with a dust extractor. If damaged, have the
protective grille replaced by an authorised service
workshop.
Changing the rubber cup on the suction plate
(suction plate D215 only)
Replace the rubber cup immediately if faulty:
• Remove the screws [10-2].
• Remove the rubber cup.
• Place a new rubber cup in position.
• Secure the new rubber cup using the screws
[10-2].
Changing the vacuum hose
• Remove the clip [11-1] using a screwdriver, for
example.
• Pull off the vacuum hose.
• Slide the clip accompanying the new hose over
the hose.
• Slide the new hose all the way onto the nipple.
• Make sure that the distance between the end of
the hose and the hose clip is 5 mm.
• Turn the screw [11-2] on the clip fi rmly to secure
the hose to the nipple.
Cleaning the button valve
The button valve needs to be removed prior to
cleaning.
• Use an Allen key (10) to press the button valve
[12-1] downwards.
• Turn the Allen key anticlockwise until the insert
[12-2] comes loose.
• Remove the unit consisting of the button valve,
spring and insert [12-3].
• Clean the seals.
• Screw the button valve back in.
9 Disposal
Do not throw the power tool in your household
waste! Dispose of the machine, accessories and
packaging at an environmentally-responsible
recycling centre! Observe the valid national regu-
lations.
EU only: European Directive 2002/96/EC stipulate
that used electric power tools must be collected
separately and disposed of at an environmentally
responsible recycling centre.
Information on REACh: www.festool.com/reach
10 Accessories
The order numbers of the accessories and tools
can be found in the Festool catalogue or on the
Internet under "www.festool.com".
11 Declaration of Conformity
Vacuum clamping unit
VAC SYS SE 1
VAC SYS SE 2
Year of CE mark: 2007
We declare under sole responsibility that this
product complies with the following norms or
normative documents:
2006/42/EC, 2004/108/EC, 2011/65/EU, EN ISO
12100, EN 60204, EN 1012-2, EN 55 014-1, EN
55 014-2, EN 61 000-3-2, EN 61 000-3-3.
Festool Group GmbH & Co. KG
Wertstr. 20, D-73240 Wendlingen, Germany
Dr. Martin Zimmer
Head of Research, Development and Technical
Documentation
2013-01-07
15
Serial no.
493582
493587