Fagor FGBV50 Manual De Instrucciones página 47

• Fully unwind the power cable (11). To do so, turn the upper cable hook (10A)
downwards.
•
Secure the cable in the slot of the upper cable hook to prevent the cable from
hindering the cleaning operations.
• Connect the power cord (11) to the mains.
• Press the on/off button (4). The steam ready LED (6) will light up BLUE and after
a few seconds it will become RED so as to indicate that the boiler is ready for use.
[Fig D1]
• Rest one foot on the brush (8) and pull the handle (1) toward you to tilt the Steam
Mop body.[Fig D2]
• Produce steam by briefly pressing the steam mop button (2). [Fig. D3]
• DO emit steam continuously so as to not to wet the surface that is to be
NOT
cleaned excessively.
• DO dose the amount of steam excessively during use on rugs/carpets.
NOT
• The steam takes a few seconds to penetrate through the cleaning cloth.
• Rub the surface that is to be cleaned by inclining the product to about 45°. [Fig.
D4]
• Before removing the Rugs/Carpets support (9) turn off the steam mop from the
on/off button (4) and allow it to cool.
• Remove the rugs/carpets support (9) by resting one foot on the footprint shaped
symbol and lift the steam mop to release the brush (8) from the rugs/carpets support
(9). [Fig D8]