Fagor FGBV50 Manual De Instrucciones página 48

USED AS A MULTIFUNCTIONAL STEAM CLEANER
W
ARNING: Always turn off the appliance before removing the Multifunctional
steam cleaner from the support structure or before attaching/detaching any accessory.
W
ARNING: SCALDING HAZARD
The steam nozzle of the manual steam cleaner and that of the hose (16I) and
accessories (16) heat up during use. Allow the appliance and all the accessories to
cool before attaching/detaching them.
• Press the steam cleaner release button (3) and pull and slightly raise the manual
steam cleaner to detach it from the support structure. [Fig.E1]
• Insert the hose (16I) on the steam nozzle by positioning the release button down
until it blocks completely. [Fig. E2]
• Select one of the accessories (16) [Fig.E3] to be used.
• Apply them to the steam nozzle at the end of the hose (16I).
• Fit them properly by aligning the tabs on the hose to those in the grooves of the
accessory. Press the accessory onto the hose (16I) and turn it clockwise until it clicks
into position. [Fig.E4]
• Only the hose (16I) can be applied directly to the steam nozzle of the manual steam
cleaner. All other accessories must be connected to the hose for them to be used.