Select Temperature; Connect To The Cigarette Lighter - Dometic Waeco TC-21FL-ISO Instrucciones De Uso

TC-21FL-ISO.book Seite 22 Mittwoch, 14. September 2011 9:43 09
Operation
7.4

Select temperature

The status display of the temperature (fig. 2 F, page 2) indicates the select-
ed temperature range. With an increasing number of illuminating LEDs, the
intensity of the temperature range also increases.
NOTE
I
The following temperature indications are subject to tolerances and
are dependent on the measuring position.
Interior space-temperature at approx. 25 °C ambient temperature:
Status display
seven illuminating LEDs
Cooling
an illuminating LED
seven illuminating LEDs
Heating
an illuminating LED
➤ If you want to select the temperature to cool/heat, press the button
"Temp" (fig. 2 F, page 2), until the requested temperature range is
reached.
7.5

Connect to the cigarette lighter

NOTE
I
When you connect the cooling box to the cigarette lighter of your
vehicle (fig. 3, page 2), observe that you have to turn on the igni-
tion, if necessary, so that the device is supplied with current.
22
Temperature range
approx 1 °C in the interior space
approx 12 °C in the interior space
(ECO mode)
approx 65 °C in the interior space
approx 50 °C in the interior space
TC-21FL-ISO
EN