Safety Instructions; General Safety - Dometic Waeco CoolFun CK-40D Instrucciones De Uso

Ocultar thumbs Ver también para Waeco CoolFun CK-40D:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 28
CK-40D.book Seite 13 Donnerstag, 30. September 2010 6:06 18
CK-40D
➤ Action: this symbol indicates that you need to do something.
The required action is described step-by-step.
✓ This symbol indicates the result of an action.
1 5, page 3: This refers to an element in an illustration. In this case, item 5
in figure 1 on page 3.
Please observe the following safety instructions.
2

Safety instructions

2.1

General safety

Use only the connection cable to connect the device to the AC mains.
Never pull the plug out of the socket by the cable.
If the cable is damaged, it must be replaced to prevent possible electrical
hazards.
Do not operate the device if it is visibly damaged.
This device may only be repaired by specialist personnel. Inadequate re-
pairs can lead to considerable hazards.
Should your device need to be repaired, please contact WAECO custo-
mer services.
Pull out the plug:
– Before cleaning and care
– After use
Ensure that the ventilation slots are not covered.
Check that the voltage specification on the type plate corresponds to that
of the energy supply.
The cooling device is not suitable for transporting caustic materials or ma-
terials containing solvents.
Electronic devices are not toys!
Do not let children play with this appliance. Children and infirmed persons
should be supervised when using the appliance.
Safety instructions
13

Publicidad

Tabla de contenido
loading

Tabla de contenido