Kicker KM10 Manual Del Propietário página 5

Altavoz para sonidos graves
Ocultar thumbs Ver también para KM10:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Due to the necessary length of these ports, you may want to fold the port along the bottom and
back walls. It will be impractical to use round ports for these designs. The displacement of the port
must be calculated and added to the internal volume of the fi nal design.
The dimensions for X, Y, and Z may vary based on the thickness of the material used to make the
port. Do not install a port opening against a solid surface, such as an internal brace, back-panel or
structural wall, seat or interior panel of your boat. The port opening must remain unobstructed. Use
the smallest dimension of the rectangular port as the minimum amount of space between the port
opening and any solid surface to insure unrestricted airfl ow.
LED Grille (sold separately) Wiring: When hard-wiring the RGB lighting, the black lead is +12V
and the red, green, and blue leads are ground. There are seven colors available, depending on
your wiring confi guration. KICKER recommends using the KMLC lighting controller (sold separately)
for more colors, patterns, and special effects.
Color Combinations: Splice and combine the ground wires to yield a different color.
Red
Green
Blue
Red/Green
Red/Blue
Blue/Green
Red/Green/Blue
Please E-mail support@kicker.com or call Technical Services at (405) 624-8583 for specifi c or
unanswered questions.
Note: KICKER Marine speakers meet or exceed industry standards for environmental humidity and corrosion, and for
material degradation due to UV exposure. All specifi cations and performance fi gures are subject to change.
Please visit www.kicker.com for the most current information. To get the best performance from your new KICKER
Subwoofer, we recommend using genuine KICKER Accessories and Wiring. Please allow two weeks of break-in time for
the subwoofer to reach optimum performance. The use of a subsonic fi lter will signifi cantly increase the power handling.
The power handling specifi cations in these charts are calculated using a 25Hz, 24dB per octave subsonic fi lter.
2A fuse
(max)
+12V
}
Ground
Red
Green
Blue
Lime Green
Magenta
Aquamarine
Blue-White
≤7"
(17.5cm)
12V
5

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Km12Kmf10Kmf12

Tabla de contenido