Soehnle fit connect 100 Instrucciones De Manejo página 26

covered by the Fit Connect 100 is calculated from
the number of steps in conjunction with the step
size stored in the Soehnle Connect app. If required,
the step size used can be adjusted in the device set-
tings of the Fit Connect 100 in the Soehnle Connect
app; the step size on delivery is 70 cm.
Sleep mode
The recording of sleep must be started by the user
by activating the sleep mode, which is explained
below. In contrast to daily activities, sleep meas-
urement results are only displayed in the Soehnle
Connect app. In sleep mode, the device does not
count any steps during movement, but analyzes the
movement data with regard to sleep quality.
Activating the sleep mode
To start the sleep function, first change to the sleep
mode display (5.9) by touching the sensor key. Now
hold the sensor button for approx. 5 seconds. Sleep
mode is activated. You can recognize this by the fact
that the tracker only activates and displays the dis-
play with a moon and the time.
GB
: