Surface Light Replacement; Charcoal Filter Replacement - Haier HMV1630 Manual Del Usuario

Ocultar thumbs Ver también para HMV1630:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

English
Cleaning and Care
leave the door open to deactivate the oven during cleaning.

SURFACE LIGHT REPLACEMENT

To avoid risk of personal injury or property damage,
1) Unplug the microwave oven or turn off
power at the main circuit breaker.
2) Remove the bulb cover mounting screws at
both light positions under the microwave.
3) Replace bulb with max. 30 watt appliance bulb.
4) Re-install bulb cover and mounting screw.
5) Plug the microwave back into the power
supply or turn the power back on at the
main circuit breaker.

CHARCOAL FILTER REPLACEMENT

A charcoal filter should be installed in your microwave oven when set for non-
vented or recirculated installation. The filter should be changed every 6 to 12
months depending on use.
1) Disconnect power to the microwave
oven at the circuit breaker panel or by
unplugging.
2) Remove the vent grill mounting screws.
3) Pull the vent grill away from the unit.
17
Disconnect the power cord before cleaning or
CAUTION
!
weargloves when replacing the light bulbs.
4) Remove the charcoal filter by pushing
it inwards. then turn and pull it away
from the unit.

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido