Master HEAT GUN Manual De Instrucciones página 2

Description & Introduction
The Master Heat Gun is a heavy-
duty, Industrial-quality, general-
purpose heat gun. High tempera-
ture Industrial jobs are done faster
with this heat gun, because our
MASTER models have higher
power and air flow ratings.
Power ratings go up to 1740 watts
(120 volts) and 2070 watts (230
volts).
SpecIfIcatIonS
Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8"L x 5-1/4"W x 9-1/2"H
Nozzle opening . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3/16" dia.
Avg. air velocity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3000 FPM at ambient
Avg. air volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 CFM at ambient
Net weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-1/2 Ibs.
120V models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60 Hz
230V models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50/60 Hz
Nozzle shield . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3/16" L
Cord length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Ft. L
Models
HG-201A 200-300
HG-202A 200-300
HG-301A 300-500
HG-302A 300-500
HG-501A 500-750
HG-502A 500-750
HG-751B 750-1000
HG-752A 750-1000
Important Safety InStructIonS
WARNING: THIS PRODUCT IS A
SOURCE OF VERY HIGH
TEMPERATURE FLAMELESS HEAT.
AS WITH ANY ELECTRICAL TOOL,
WHEN USING HEAT TOOLS,
ALWAYS FOLLOW SAFETY
PRECAUTIONS TO REDUCE THE
RISK OF FIRE, ELECTRIC SHOCK
OR PERSONAL INJURY.
1) Read and understand this
instruction manual before using
this product. Save this manual
for future reference.
2) WARNING: With a heat gun, as
with all other heat tools, keep a
fire extinguisher handy and
observe all sensible fire precau-
tions.
We do not recommend using
this heat gun on hollow surfaces
such as outdoor siding, walls,
soffits, panels and partitions, etc.
These areas often contain flam-
mable materials such as dust,
wood chips, insulation, rodent
nests and other debris which
could accidentally ignite.
Your heat gun is best used for
2
Air flow ratings are 3000 FPM avg.
air velocity and 23 CFM avg. air vol-
ume. The combination of these fac-
tors means high performance for the
end user. Use the Master Heat Gun
for many jobs "wherever a fast, por-
table, flameless heat is the need."
Heat Guns are a source of
extremely high temperature flame-
less heat (up to 1000°F/ 540°C). As
Temperature Range
°F °C
93-150
93-150
150-260
150-260
260-400
260-400
400-540
400-540
stripping paint from solid wood-
work with ins and outs such as
solid interior trim, mouldings,
turnings, doors, balusters and
porch trim, etc.
When stripping paint, always
keep the heat gun moving in a
continuous back and forth
motion. Stopping or pausing too
long in one spot could ignite the
surface you are working on or the
area behind it. See our Paint
Stripping Instructions for more
information.
3) Do not breathe or swallow lead
based paint in any form. Many
old homes and other buildings
contain lead based paint. Dust,
scrapings, residues and vapors
of lead based paint are extremely
poisonous. Prevent possible lead
poisoning when stripping this
type of paint by using adequate
ventilation (such as a window fan
in the exhaust mode), and keep-
ing a clean work area. When dust
or vapors are present, use a res-
pirator designed to filter lead. Move
work outside when possible.
Failure to follow adequate safety
with other products which gen-
erate extremely high tempera-
tures, regardless of your
specific application, extreme
care and caution should be
observed when using this prod-
uct. Therefore, we recommend
that you pay particular attention
to the safety instructions which
we have provided for your pro-
tection.
Volts Amps
120 5
230 3
120 12
230 6
120 14
230 7
120 14.5
230 9
precautions when working with
lead based paint could result in
lead poisoning. See our Paint
Stripping Instructions for more
information.
4) WARNING: to reduce the risk
of fire or electric shock, do not
expose heat guns to rain or
moisture. Store indoors.
Connect to grounded outlet
only.
5) Do not use plug adaptors or
remove the ground prong from
the plug. This tool is equipped
with a 3-prong plug and a
3-wire grounding system.
Connect to properly grounded
outlets only.
6) Use heat gun only on adequately
rated circuits to avoid overheat-
ing of elec trical systems.
7) Master heat guns can produce
up to1000°F (540°C) of flame-
less heat out of the nozzle. Do
not direct this hot air stream at
your clothing, hands or other
body parts. Do not use as a
hair dryer.
www.masterappliance.com
Watts
600
690
1440
1380
1680
1610
1740
2070