TO 6050 TO 7050
TOASTER FEATURES
1.
Bread slots: To insert the bread. TO 6050 has one slot, TO 7050 has two slots.
2.
Bun warmer: Put buns in the top so that they will be heated when the toaster is on.
3.
Bread carriage lever: To pull down the bread
4.
Rotary electronic browning control: Sets desired toast color from light to dark.
5.
Cancel function: Interrupts toasting process when pressed.
6.
Defrost function: Defrosts and toasts frozen bread. Indicator lights when selected.
7.
Reheat function: Reheats without browning. Indicator lights when selected.
8.
Crumb tray: Removes easily to clean crumbs from bottom of toaster.
CAUTION
Warning: To reduce the risk of fire or electric shock, do not remove the bottom cover of the toaster. Inside
there are no pieces that can be manipulated by the user.
USE & CARE
Before first use, remove all packaging from toaster. Check inside toaster slots for packaging and remove.
Note: Do not place any bread in toaster during the first toasting to allow the new elements to preheat and
burn off any dust that may have accumulated during assembly.
1. Make sure the crumb tray is in place and the bread carriage lever is on the UP position.
2. Set up toaster on flat, stable countertop surface away from the edge and at least 3 inches away
from wall or rear of counter.
3. Unwind power cord and plug power cord into nearby outlet.
4. Insert slices of bread. Be sure the bread carriage lever is on UP position.
5. Turn the light/dark selector onto desired position. The higher the number (1-7), the darker the
toast color.
6. Press the bread carriage lever down until it locks into position.
7. When the toasting cycle is completed the toast is automatically ejected up. To terminate the
toasting cycle before it is completed, simply press the cancel button.
8. After use, unplug the toaster from electrical outlet.
12