Preparation; Setting Up The System; Adjusting The Date And Time - i-SENS VetMate Manual De Usuario

Preparation

Setting Up the System

Press and hold the S button for 3 seconds to enter SET mode.
After all settings are finished, press and hold the S button for 3
seconds to turn off the meter.
Press the ▲ or ▼ button to reach the accurate value. Press and
hold the ▲ or ▼ button to scroll faster.

Adjusting the Date and Time

Step 1 Entering SET Mode
Press and hold the S button for 3 seconds.
After all the segments flash across the
screen, 'SET' will be displayed on the
screen. Press the S button again to go to
the next step.
Step 2 Setting the Year
Press the ▲ or ▼ button to adjust until
the correct year appears. After setting the
year, press the S button to confirm your
selection and go to the next step.
14 www.i-sens.com
Step 3 Setting the Month
A number indicating the month will blink on
the bottom left corner of the screen.
Press the ▲ or ▼ button until the correct
month appears. Press the S button to confirm
your selection and go to the next step.
Step 4 Setting the Date
Press the ▲ or ▼ button until the screen
displays the correct date. Press the S button
to confirm the date and go to the next step.
Step 5 Setting the Time Format
The meter can be set in the AM/PM 12-hour
or the 24-hour clock format. Press the ▲ or ▼
button to select a format. The AM•PM symbol
is not displayed in the 24-hour format.
After selecting the format, press the S button
to go to the next step.
www.i-sens.com 15