Engine Maintenance - Craftsman 247.28905 Manual Del Usuario

Ocultar thumbs Ver también para 247.28905:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

ENGINE
MAINTENANCE
Checking
the Engine
Oil
Onlyuse high qualitydetergentoil ratedwith APIserviceclassification
SF,SG,SH, or SJ, Selectthe oil's SAEviscositygradeaccordingto
the expectedoperatingtemperature. F ollowthe chart below.
Althoughmulti-viscosity oils (5W20,10W30,etc.)improvestarting
in coldweather,they will result in increasedoil consumption when
usedabove32°E Checkyour engineoil levelmorefrequentlyto avoid
possibleenginedamagefrom runninglowon oil.
f'_older _
32°F
_War me'_r
Oil Viscosity Chart
Tocheckthe engineoil, proceedas follows:
Ensurethat the tractoris on a levelsurface.
Cleantheoil fill area of anydebris.
1.
Removethedipstickand wipe with a clean cloth.
2.
Insertand tightendipstick.
3.
Removethedipstickand checkthe oil level.It shouldbe at the
Fullmark on the dipstick.See Figure11.
f
Dipstick-_
Oil Drain
Valve
Oil Drain
Sleeve
J
Figure11
If low,add oil slowlyintothe engineoil fill. Do notoverfill.After
addingoil, wait one minuteand then recheckthe oil level.
Donotoverfill.Overfillingwith oil maycausethe engine to not start,
hard starting,or engine smoking.If overthe FULLmark on the
dipstick,drain oil to reduceoil levelto FULL markon dipstick.
5.
Replaceandtightendipstick.
Changing
Engine
Oil
The engineoil shouldbe changedin the first 5 hoursand thenevery
50 hoursor once a season.Tochangethe engineoil, proceedas
follows:
1.
With engineOFF but still warm,disconnectsparkplug wireand
keepit awayfrom sparkplug.
2.
Removethe oil fill cap/dipstickfrom theoil fill tube. See Figure11.
3.
Clipthe oil drain sleeve(packedwith this manual)ontothe oil
drain port. Routethe oppositeend of the sleeveintoan appropri-
ate oil collectioncontainerwith a capacitygreatenoughto collect
the usedoil.
4.
Removethe oil drain plug,The oil will begin todrain out of the
engine.
5.
After the oil hasfinisheddraining,replacethe oil drain plugand
tighten.Be carefulnot to overtighten.
6.
Removethe oil drain sleeveand storefor later use.
7.
Refillthe enginewith newmotoroil untilthe oil levelon the
dipstick readsFULL.Replacetheoil fill cap/dipstick.
Usedoil is a hazardouswasteproduct.Disposeof usedoil properly.
Do notdiscardwith householdwaste.Checkwith your localauthori-
ties or or contact 1-800-4-MY-HOME for a list of safe disposal/
recyclingfacilities.
Changing
the Oil Filter
1.
Drainthe oil fromthe engineas describedabove.
2.
Removethe oil filter and disposeof properly.See Figure12.
Figure12
3.
Beforeyou install the newoil filter, lightly lubricate the oil filter
gasketwith fresh,cleanoil.
4.
Installthe oil filter byhand untilthe gasketcontactstheoil filter
adapter,then tightenthe oil filter 1/2to 3/4 turns.
5.
Add oil as describedabove.
6.
Startand runthe engine.Asthe enginewarmsup,checkfor oil
leaks.
7.
Stoptheengineand checkthe oil level.It shouldbe at the FULL
markon the dipstick.
19

Publicidad

Tabla de contenido
loading

Tabla de contenido