Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Symbols
Standby and Turn the device on.
Battery installation guide
Direct current
SN
Serial number
Date of manufacture
Type BF: Device, cuff and tubing are
designed to provide special protection
against electrical shocks.
The indicator while measurement is in
progress. It blinks while detecting the
pulse.
Irregular heart beat indicator.
The indicator that detects irregular
heart beats or any excessive body
movement during the measurement.
Previous measurements stored in
MEMORY.
The battery power indicator during
Full
measurement.
Battery
low
The battery is low when it blinks.
Battery
Unstable blood pressure due to
movement during the measurement.
The systolic and diastolic values are
within 10 mmHg of each other.
The pressure value did not increase
during inflation.
The cuff is not fastened correctly.
The pulse is not detected correctly.
PUL. DISPLAY ERROR
SYS
Systolic blood pressure in mmHg
DIA
Diastolic blood pressure in mmHg.
PUL./min
Pulse per minute
Clock button mark
Alarm ON/OFF mark of the reminder
EC directive medical device label
The certification trade mark registered
to the Australian Communication
Symbols
Function / Meaning
ENGLISH 3
Recommended Action
Measurement is in progress
remain as still as possible.
Replace all batteries with new
ones, when the indicator
blinks.
Try measurement again.
Remain very still during the
measurement.
Fasten the cuff correctly, and
try the measurement again.
If you want to stop the sound,
press the START button.
Publicidad
Tabla de contenido
