Weighing; Weighing Units - Adam Equipment Highland Serie Manual Del Usuario

EN
Note: When the container is removed a negative value will be
shown equivalent to the total value of the amount tared (Except on
approved models). The balance will not tare a value for a container
unless the stability light indicates that the weight is stable thus
ensuring a correct taring function.
4.3 WEIGHING
To determine the weight of a sample, first tare an empty container (if used), then
place the sample in the container. The display will show the weight of the sample
and the unit of weight currently in use. The stable indicator will light when the
reading is stable.
4.4 WEIGHING
To change the weighing units, press [Mode] to cycle through the options of units
that are enabled. See Parameters 6.1 Enabling Weighing Units, to enable or disable
the weighing units.
Weighing Units on approved models = g , Kg, ct
© Adam Equipment Company 2018
UNITS
10