Introduction; Set Up - Adam Equipment Highland Serie Manual Del Usuario

EN
2.0 INTRODUCTION
Thank you for purchasing your new Highland
balance has all the features you really need: DC adapter and internal rechargeable
battery, HandiCal
and ShockProtect
communication with printers and computers, splash‐proof keypad, and sturdy
plastic construction, the Highland
hope that you enjoy using your new balance.
Before operating parts marked with a
and operate with caution to avoid hazard.
NOTE: External metal parts and connectors are not linked to earth.
NTEP Approved models, HCB aM, have calibration controlled by jumpers or
passcodes and other limitations as noted in the manual.
3.0 SET UP
3.1 UNPACKING
1) Remove the balance, draft shield, top pan, DC adapter and pan support from
the packaging
2) Remove the shipping protection screw and transit disc from the top of the
balance and place the plastic top pan support on the balance. Do not use
excessive force when removing and installing the screw.
3) Gently place the plastic pan support into the receptacle and secure with the
supplied screw. To not over‐tighten the screw. It should be finger tight only.
Put the Stainless steel pan on top of the pan support
© Adam Equipment Company 2018
TM
calibration (not available on approved models), backlit display,
TM
with overload indicator. With RS‐232 and USB interface for
TM
AND SETTING UP
TM
portable balance, Every Highland
series will be a balance you can rely upon. We
!
symbol please read the instruction manual
YOUR BALANCE
TM
4