koban TRUE RMS 1000A AC Pinza Manual Operativo página 130

back case and / or battery door is opened to avoid electric
shock.
When the Meter working at an effective voltage over
30V in AC, special care should be taken.
Use the proper terminals and functionyou're your
measurements.
Do not use or store the Meter in an environment of high
temperature, humidity, explosive, inflammable and strong
magnetic field. The performance of the Meter may
deteriorate after dampened.
Do not use the Meter if the surface of it is wet or the
user's hands are wet.
When using the test leads, keep your fingers behind the
finger guards.
Replace the battery as soon as the battery indicator
appears. With a low battery, the Meter might produce false
readings that can lead to electric shock and personal injury.
When opening the battery door, must make sure
the Meter is power off.
When servicing the Meter, use only the same model
number or identical electrical specifications replacement
parts.
The internal circuit of the Meter shall not be altered at
will to avoid damage of the Meter and any accident.
Soft cloth and mild detergent should be used to clean
the surface of the Meter when servicing. No abrasive and
solvent should be used to prevent the surface of the Meter
from corrosion, damage and accident.
www.grupotemper.com
TRUE RMS 1000A AC WATT Clamp Meter
KPAW-01
5