Toilet System With Tank Monitor And Shut-Down Relay Installation; Warranty And Product Liability - Dometic MASTERFLUSH MF7100 Instrucciones De Montaje Y De Uso

Macerator Toilet
8 .6 Toilet system with tank monitor
and shut-down relay installation
Dometic MasterFlush toilets operate with Dometic DTM
tank monitor systems (available separately) to shut down
electrical power to the toilet when the holding tank is
full. This prevents overfilling the holding tank. Refer to
toilet system wiring diagram on parts list.
1. Route input power wire from "full tank" relay of DTM
panel to toilet's flush switch location.
2. Follow flush switch installation instructions beginning
at Section 8.5, step 10.
9 Warranty and Product
Liability
LIMITED WARRANTY
LIMITED WARRANTY AVAILABLE AT
COM/WARRANTY.
IF YOU HAVE QUESTIONS, OR TO OBTAIN A COPY
OF THE LIMITED WARRANTY FREE OF CHARGE,
CONTACT:
DOMETIC CORPORATION
CUSTOMER SUPPORT CENTER
1120 NORTH MAIN STREET
ELKHART, INDIANA, USA 46514
1-800-544-4881 OPT 3
EN
WWW.DOMETIC.

Warranty and Product Liability

17