Warranty Conditions - Sagola 5000 Serie Instrucciones De Uso

28/29
The location where work is carried out must have sufficient ventilation in accordance with
current legislation and regulations.
Near the unit, only keep the amount of product and thinner required for the work being done
at that time. After work has been completed, thinners and the product to be applied must
be returned to their corresponding storage location.
Keep the working area clean and free of potentially dangerous waste (Thinners, rags, etc. )
While work is in progress, there must not be any source of ignition (naked flames, lighted
cigarettes, etc.) in the working area as these might generate easily flammable gases.
Likewise, the approved protective means must be used (breathing, hearing, etc.) in accordance
with the regulations established in this regard.
If the unit is used in an inadequate manner or its components are altered in any way, severe
material damage may occur and bodily harm may be caused to the operator, other personnel
and/or animals and may even cause death. SAGOLA S.A. accepts no responsibility in for any
damage caused through the incorrect use of the unit.
Never exceed the maximum air inlet pressure (12 Bar).
As a general, preventive measure we advise you to wear goggles in accordance with the
specific environmental regulations and characteristics for the work centre.
USE SAGOLA ANTISTATIC HOSES TO ELIMINATE POSSIBLE ELECTRICAL DISCHARGES THAT
MIGHT CREATE THE RISK OF FIRE OR EXPLOSION.
The use of solvents and/or detergents that contain halogenated hydrocarbons (trichloroethane,
methyl chloride, etc.), may cause chemical reactions in the unit as well as in its zinc-coated
components (trichloroethane mixed with small amounts of water produces hydrochloric acid).
For this reason, these components may rust and in extreme cases the chemical reaction
caused may be explosive. We recommend you use products that do not contain the
aforementioned components. Do not use acids, soda (alkalis or pickling substances, etc.)
for cleaning under any circumstances.
Safety standards must be understood and applied.
Any non-compliance with the indications set out in this manual may lead to incidents affecting
the physical integrity of the user or other personnel or animals.
Respect and comply with indications relating to the conservation of the environment.
Should you have any doubts, please contact the SAGOLA Technical Service.

18. Warranty Conditions

This device has been manufactured with great precision and has been subjected to a large
number of controls before leaving the factory.
The WARRANTY is valid for three years, counted as of the date of purchase, which will be
indicated by the seller in the place provided for this purpose, together with his stamp.
Once the unit has been received, please complete the warranty and send this to the manufacturer
for validation.
This WARRANTY covers any manufacturing defect, which will be repaired free of charge. However,
any malfunction resulting from the incorrect use of the unit, such as inadequate connections,
breakage due to dropping, or similar, the normal wear of components and in general any
deficiency not attributable to the manufacturer of the device, are expressly excluded. Likewise,
the WARRANTY shall be rendered null and void when it is evident that the unit has been handled
by persons other than our Technical Assistance Service.
ENGLISH