2. Opening the TV set
Pull out the mains plug!
Remove the connecting cables from the TV set.
Loosen and remove the screws marked with arrows in the corresponding illustration according to the TV model.
Screws for be loosened in the following TV sets:
Xelos A26, (Xelos A26 Relaunch)
10 screws (7 screws) of size T20, page 33, fi g. 5
Xelos A32
8 screws of size T20, page 40, fi g. 16
The upper screws of the rear panel (arrow A) are located under a small cover.
The small cover is opened by lifting upwards.
Xelos A37
11 screws of size T20, page 40, fi g. 17
The upper screws of the rear panel (arrow A) are located under a small cover.
The small cover is opened by lifting upwards.
Xelos A42 / Modus L42
48 screws of size T20 and 3 screws of size T10, page 50, fi g. 38
Modus 32
8 screws of size T20, page 49, fi g. 36
The upper screws of the rear panel (arrows A) are located under a small cover.
The small cover is opened by lifting upwards.
Modus 37
11 screws of size T20, page 49, fi g. 37
The upper screws of the rear panel (arrows A) are located under a small cover.
The small cover is opened by lifting upwards.
Concept L26
6 screws of size T20, page 41, fi g. 18
Concept L32
6 screws of size T20, page 41, fi g. 19
Individual 26
6 screws of size T20, page 42, fi g. 20
Individual 26 Selection
4 screws of size T20, page 42, fi g. 20
Individual 32
6 screws of size T20, page 42, fi g. 21
Individual 32 Selection
4 screws of size T20, page 42, fi g. 21
Individual 40 Selection
Individual 40 S, Art. No. 66428 (x) 47 : Remove 6 screws, page 43 and 44, fi g. 23 and 24.
Individual 40 S, Art. No. 66428 (x) 37: Remove 9 screws, page 43 and 44, fi g. 22 and 24.
Spheros R 26
8 screws of size T20 on the rear panel of the TV set page 33, fi g. 6
4 screws of size T20, concealed by the front panel (page 36, fi g. 11, arrow 1 to 4
The front panel must have been removed fi rst.
Proceed as follows.
Pull the bottom of the front panel about 20 mm away from the TV set as shown on page 34, fi g. 7.
14