AERMEC Omnia HL Serie Manual De Instrucciones página 25

INSTALLING THE ELECTROSTATICALLY PRECHARGED AIR FILTER
•
Installation
- Remove the ventilation grille from the
unit. Use the point of a tool to place
pressure on the upper hooks of the
grille.
- Remove the filter from its sealed pack-
age.
- Insert the filter in the suction grille.
- Reattach the ventilation grille to the
unit. First insert the lower hooks of the
cover, and then insert the upper hooks.
•
Characteristics
Class 2 (UL 900).
Easy to remove, it is supplied in a
sealed box only to be opened when it
is to be used.
The electrostatic precharge of the
filter is spent after two years of the
box being opened, after this period it
behaves like a normal filter.
For this reason replacement over two
years with a new one is recommended
(available as a spare part from Aermec
After Sales centres).
•
Maintenance
Cleaning frequently, removing
the dust that has built up using
a vacuum, the use of water and
cleaning substances considerably
speeds up the electrostatic precharge
deterioration.
IHLSLJ 1004 - 6887203_03
25