Monty Ef39.20 Manual De Usuario página 33

3. Turn the key to unlock the
battery.
Put on battery
2. Push the battery into the
battery container.
Steps to charge the battery
6. Confirm that the local power supply corresponds with the requirement of the charger, the input
voltage is between 100V—240V.
7. Switch your e-bike off on the main switch on the battery case.
8. The battery can be charged on the e-bike or removed from the e-bike as shown.
9. Connect the charger plug and charging port of the battery first, and then connect the power plug
and the power source.
10. When the red light turns on the charging starts.
4. Take out the battery
2. Turn the key to lock the battery
32 / 69
Rev. 2014‐V1