Setting The Clock; Manual Operation - Edesa HC1 Serie Manual De Instrucciones

This timer may be used to set a time at the end of wich the oven automatically
switches off. It can also be set to start and stop automatically while there is no one
in the house.
In any case, if you do not want a timed operation, the oven can be operated
manually.
The timer also functions as a clock.
When installing the oven or after a power cut,
you must set the clock.
Use the small inner control on the left.
If you wish to use the oven without the timer, turn
the large outer control knob clockwise until the
hand symbol
NOTE: Make sure that the clock shows the same
time as the column of numbers on the right hand
side of the clock window. A crossed-out bell or a
zero "0" will prevent the oven working in a
manual situation as these are deemed to be "end
of automatic cooking" symbols.
Now proceed to start oven as shown in "Oven operation".
Oven operation will not be timed. Remember that you have to switch the
oven off at the end of cooking.
TIMER OPERATION

SETTING THE CLOCK

MANUAL OPERATION

appears.
65