General Information; Technical Data - Alpina AS 51 Instrucciones De Uso

(Translation of the original instructions)

1 GENERAL INFORMATION

This is a safety alert symbol. Failure
to observe the instructions provided
may lead to serious injury and/or ma-
terial damage.
1.1 SYMBOLS
The following symbols are found on the machine.
They are designed to remind the operator of the
precautions which need to be taken and how to
use the machine safely.
What the symbols mean:
Warning.
Read the instructions before
operating the machine.
DANGER - Keep hands or feet
away from the rotating parts.
DANGER - ejected objects.
Never direct the discharge chute at
bystanders or animals.
DANGER - rotating impeller.
Keep clear of the snow discharge
opening at all time.
Keep the area of operation clear
of people, especially children and
pets.
Disconnect the spark plug cap and read
the instructions before carrying out any
maintenance or repairs.
DANGER - Keep away from hot
surfaces.
DANGER - Engines emit carbon
monoxide.
DO NOT run in enclosed area.
1.2 REFERENCES
1.2.1 Figures
The figures in this User Manual are numbered 1,
2, 3 and so on.
Components indicated in the figures are marked
A, B, C etc..
A reference to component C in figure 2 is written
as: "See fig. 2:C" or simply "(2:C)"
ENGLISH
All figures are indicative. Parts on your machine
may vary from those shown.
1.2.2 Headings
Headings in this User Manual are numbered
as indicated in the following example: "2.1
DESCRIPTION" is a subheading of "2
TECHNICAL DATA" and is included under this
heading. When reference is made to a specific
heading, usually only the relative number is given.
For example: "See 2.1".
2.1 DESCRIPTION
Snow thrower designed to clear and/or remove
snow.
2.2 MACHINE DIMENSIONS
The dimensions of the snow thrower are provided
in figure 2.
2.3 TECHNICAL DATA TABLE
Description
Engine Model
Engine displacement
Engine power
Engine speed
Fuel
Fuel tank capacity
Oil
Oil tank capacity
Spark plug
Spark plug gap
Machine mass
Working width
Max throwing distance
Guaranteed sound power level
Measured sound power level
Uncertainty
Sound pressure level
Uncertainty
Vibration value
Uncertainty
The example of the declaration of conformity can
be found at the end of the handbook.

2 TECHNICAL DATA

EN
GGP SM 50
cc 87
kW 1,7
rpm 4200
type gasoline
lt 1,6
type 5W30
lt 0,35
type E7RTC
mm 0,7-0,8
kg 28,5
cm 50
cm 850
dB (A) 112
dB (A) 109
dB (A) 3
dB (A) 94
dB (A) 3
m / s ² 6,3
m / s ² 2,5
7