Care And Maintenance - TFA Dostmann WAVE Manual De Instrucciones

To wall mount:
1.
2.
Note:
Before permanently fixing the transmitter wall base, place all units in the
desired locations to check that the outdoor temperature reading is
receivable. In event that the signal is not received, relocate the transmitter
or move it slightly as this may help the signal reception.

CARE AND MAINTENANCE


Clean the temperature station and the transmitter with a soft damp cloth. Do not use
solvents or scouring agents.

Remove the batteries if you do not use the product for a lengthy period.
Secure the bracket onto a desired wall using the screws and plastic
anchors.
Clip the remote temperature sensor onto the bracket.
67