EAS ELECTRIC EMSS179AX Manual De Usuario página 40

respectively; there is no setting for special mode. The ice-maker is off by
default.
After the operation of display panel, the status is changed and memorized to
main control board.
In normal cases, display screen enters standby state and then dies out after
display board is locked without operation of door opening and key operations for
30s.
When there is key operation, communication failure, sensor failure and ice-
making malfunction when door is opened, the display screen will light up and
prompt relative information.
Numeric area displays the temperature settings of all chambers:
 When a communication failure occurs, the area of freezing temperature
gives a prompt of communication failure.
 When a sensor failure occurs: the area of freezing temperature gives a
prompt of all fault codes in turns under the lock state; in unlock state, the
unlock pattern lights up; in lock state, the lock pattern lights up.
Key operation
FRZ.TEMP: Freezing temperature key.
REF.TEMP: Refrigerating temperature key.
MODE.SEL: Option key of function
LOCK/UNLOCK:
ICE OFF: Ice maker ON/OFF key
DISPENSER: Option key of ice water
1. LOCK/UNLOCK
Hold "LOCK/UNLOCK" key for 2s under the unlock state, the system enters the
lock state; hold "LOCK/UNLOCK" key for 2s under the lock state, the system
enters the unlock state.
In unlocking, the unlock pattern lights up; in locking, the lock pattern lights up.
To operate the unlocked keys under the lock state ( except option key of ice
water and filter reset), the lock pattern will flash lights.
Without any key operation for 30s under the unlock state, the system enters the
lock state automatically. Except the key "Dispenser" and operation of filter rest,
the operations of following keys must be a buzzing sound for fault operation.
The following settings must be valid upon locking.
V.1
40