MAINTENANCE AND CLEANING:
CLEANING:
- Metal parts may be cleaned with a damp cloth and wiped
dry with a soft cloth.
- Clean the harness and plastic parts with a mild soap and wa-
ter solution. Rinse and wipe dry.
- Do not use abrasive cleaners or bleach.
MAINTENANCE:
- Check that nothing is broken and missing and that no sharp
edges have been exposed. Stop using the highchair immedia-
tely if any are found.
- Inspect all studs, nuts and screws or tightnes. Check that all
straps and harness attachment points are in good working
order.
- Do not use replacement parts other than those approved by
the manufacture distributor. Failure to do this may invalidate
your warranty.
17
17
17
17