koban KPA-20 Manual De Instrucciones página 33

resistance, continuity, diodes.
 Replace the battery as soon as the battery
indicator
the Meter might produce false readings that
can lead to electric shock and personal injury.
 Remove the connection between the testing
leads and the circuit being tested, and turn the
Meter power off before opening the Meter
case.
 When servicing the Meter, use only the same
model number or identical electrical
specifications replacement parts.
The internal circuit of the Meter shall not be

altered at will to avoid damage of the Meter
and any accident.
 Soft cloth and mild detergent should be used
to clean the surface of the Meter when
servicing. No abrasive and solvent should be
used to prevent the surface of the Meter from
corrosion, damage and accident.
 The Meter is suitable for indoor use.
Turn the Meter power off when it is not in use

and take out the battery when not using for a
long time. Constantly check the battery as it
may leak when it has been using for some time,
replace the battery as soon as leaking appears.
A leaking battery will damage the Meter.
General Specifications
Max display: LCD 3 ½ digits, 1999 counts, 0.5" high
Polarity: Automatic, indicated minus.
Measure method: double integral A/D switch
implement
Sampling speed: 2 times per second
appears. With a low battery,
- 33 -