CHAPTER 1 PRECAUTIONS WHEN OPERATING
1.1 PRECAUTIONS WHEN TRANSPORTING
To avoid damages
* Keep the original packing materials for the drive unit.
* Prior to sending the drive unit, remove the disk from drive unit and repack
drive unit as it was originally packed.
1.2 INSTALLATION LOCATION
Do not expose unit to the following environments.
* High-temperature, high-humidity, extreme temperature changes.
* Dusty
* Excessive vibration/ sudden shock.
* Inclined place.
* Direct sunlight.
1.3 PRECAUTIONS FOR USE
* Never push or insert objects of any kind through the disk slot, never spill liquid
of any kind on the unit.
* Never use the Magnetic head cleaning kit. If you use it, it may shave the head. The
SuperDisk drive's head is cleaned by itself.
* Do not place objects on the product.
* Do not attempt to repair this product yourself.
* Do not open or remove covers.
1.4 PRECAUTIONS FOR OPERATION
To avoid data read/ write error
* Do not move the drive unit during operation.
* Do not operate the unit immediately after a sudden increase in temperature.
* Maximum Tilt angle of 15 degrees, either horizontal or vertical installation is allowed.
1.5 PRECAUTIONS WHEN HANDLING DISKS
Do not finger the magnetic disk through
the shutter.
While not using, ensure the disk shutter is
tightly closed to protect the magnetic
surface.
Keep away any magnetic instrument from
a disk.
Store a disk in the specified environment:
Temperature:
4 to 60 °C
Relative humidity:
Max. wet bulb temp. is 29 °C
No moisture condensation
8 to 90 %
Never!
Protect
Never!
4-60 ° C ( 39-140 ° F)
A-3