Replacing The Lamp; Procedure For Lamp Replacement - Pioneer KURO KRF-9000FD Manual De Instrucciones

5

Replacing the Lamp

The lamp is a consumable item. If the image is dark or the lamp is turned off, replace the lamp unit.
When the lamp replacement time approaches, a message is displayed on the screen and the condition is indicated by the
indicator. (pP36, 37)
CAUTION
Pull the power plug from the power
outlet. Failure to do so may cause
injuries or electric shocks.
Do not replace the lamp
immediately after the unit has been
used. Allow a cooling period of 1
hour or more before replacement.
The temperature of the lamp is still
high and this may cause a burn.
Do not apply shock to the lamp
unit. It may cause lamp blowout.
Do not use flammable air duster to
clean the internal parts of the unit.
This may cause fire.
MEMO
Usable Lamp Life
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
The usable lamp life for this unit is
approximately 2000 hours. The
usable lamp life of 2000 hours is
merely the average usable life of
lamps and we do not provide any
guarantee for this figure.
The lamp life may not reach 2000
hours depending on the operating
conditions.
When the lamp has reached the
end of its usable life, deterioration
progresses rapidly.
If the image is dark or the colour
tone is abnormal, replace the lamp
unit as soon as possible.
Purchasing the Lamp Unit
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Please consult your authorized
dealer.
Lamp Unit
Part No. : BHL5009-S(P)
38
Troubleshooting

Procedure for Lamp Replacement

A
B
C
Remove the lamp cover
Remove the screws with a + screwdriver.
Loosen the screws on the lamp unit
Loosen the screws with a + screwdriver.
Pull out the lamp unit
Grasp the handle and pull out the lamp unit.
Handle