Cleaning And Replacing The Filter; Clean The Filter - Pioneer KURO KRF-9000FD Manual De Instrucciones

Cleaning and Replacing the Filter

Clean the filter regularly or air intake efficiency may deteriorate and malfunction may occur.
A
Remove the inner filter
B

Clean the filter

Wash the filter with water and dry it in a shaded area.
In extremely soiled cases, use of a neutral detergent is recommended.
Put on rubber gloves when using a neutral detergent.
After washing the filter with water, make sure that it is completely dry before
reinstalling. Otherwise, electric shocks or malfunctions may occur.
Do not clean the filter with a vacuum cleaner or air duster. The filter is soft
and may be damaged.
C
Reinstall the inner filter
Check that the left and right
claws are locked onto the unit
Lift up while pushing the claw
ENGLISH
CAUTION
Pull the power plug from the power
outlet.
MEMO
If the filter is damaged or too
dirty to be cleaned
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Replace with a new filter. A dirty
filter will dirty the internal parts of
the unit and cause shadows on the
video image.
To purchase a new filter or when
there is dirt in the internal parts,
consult your authorized dealer.
Inner Filter
Part No. : LC32058-002A
41