DeVilbiss COMPACT-I SP-100-430-K Operación Manual página 2

Page 2 SB-2-586-H
Read and follow all instructions and Safety Precautions before using
CHARACTERISTICS
This automatic spray gun complies to ATEX regulations
94/9/EC, protection level II 2 G X, suitable to use in Zones
1 & 2.
This Compact-I is a production spray gun suitable for
use with automatic and semi-automatic machine in
conventional, HVLP or Trans-Tech application. (See page
9 for application details.)
To handle a wide range of coating materials the material
passages are manufactured from high grade stainless
SPECIFICATIONS & MATERIALS OF CONSTRUCTION
Fluid inlet & recirculation "P" & "R"
Air inlet (Atom & Fan) "A" & "F"
Cylinder/trigger "Cyl"
Maximum temperature in use
Spray gun weight
Gun body
Tip / Needle / Spray head
EC Declaration of Conformity
We, Finishing Brands UK, Ringwood Rd, Bournemouth, Dorset, BH11 9LH, UK, as the manufacturer of
the Spray gun model Compact-I, declare, under our sole responsibility that the equipment to which this
document relates is in conformity with the following standards or other normative documents:
BS EN 292-1 PARTS 1 & 2: 1991, BS EN 1953: 1999; and thereby conform to the protection requirements
of Council Directive 98/37/EEC relating to Machinery Safety Directive, and; EN 13463-1:2001, council
Directive 94/9/EC relating to Equipment and Protective Systems intended for use in Potentially
Explosive Atmospheres protection level II 2 G X.
DeVilbiss reserves the right to modify equipment specification without prior notice.
Operation Manual
Compact-I Automatic Spraygun
Important
this equipment
Thread
1/4" BSPP(F)
1/4" BSPP(F)
1/8" BSPP(F)
40° C (104° F)
656 gms (1.44 lbs)
Aluminium hard anodized
Stainless steel 303
D. Smith, General Manager
12th February 2014
steel. Several needles are available with plastic tips.
Fluid tips and needles are available in high grade stainless
steel.
Pressure feed material supply can be re-circulating or
direct.
The needle adjustment knob has 18 ratchet positions
(per one revolution of the knob) which allows fine and
accurate fluid flow control.
Pressure
Max 7 Bars (100 psi)
Max 7 Bars (100 psi)
4 to 7 Bars (60-100 psi)
CA PROP
65
PROP 65 WARNING
WARNING: This product
contains chemicals known
to the State of California
to cause cancer and birth
defects or other
reproductive harm.