Peaq PPA120BT-B Manual De Instrucciones página 25

English
Charging battery
Attention! Charge the internal battery completely before fi rst
use.
1. Connect USB plug to the USB socket
at the adapter (fi g. 1) and connect the
micro-USB plug to the socket on back
side of the speaker (fi g. 2).
2. Connect the power adapter to a
power outlet.
3. The white LED (PPA120BT-B) / red
LED (PPA120BT-W) (fi g. 3) on the
speaker's front fl ashes to indicate
battery is being charged. The LED will
go out when the battery is completely
charged.
4. After charging is fi nished, disconnect
the power adapter from the speaker
and from the power outlet.
Notes:
• Recharge the battery, when both
LEDs (fi g. 3) on the front fl ash
alternately.
• Alternatively, you may charge the
battery by connecting the speaker
to a computer USB port using the
provided USB cable.
• Partial charging does not impair
battery's lifetime.
• Charging and audio playback possible
at the same time.
26