Getting started
Phone setup
Installing the micro-SIM card
You must insert your SIM card to make phone calls. You do not need to
power off your phone before inserting or removing the SIM card as this
phone can support hot swap.
Insert the SIM tool into the small pin hole opening in the SIM tray. Apply a
small amount of pressure until the SIM tray pops out. Grab hold of the SIM
tray and pull straight out. Swap your SIM card and re-insert the tray.
Important: To avoid damage to the phone, please use the standard micro-
SIM card included in the box.
6
Installing a microSDHC™ card (not included)
The microSDHC card can be installed and removed while the phone is
powered on.
Before you install or remove the microSDHC card, insert a pin into the SIM tray
until the SIM cassette pops out.
Before removing the microSDHC card, please unmount the microSDHC card
to avoid data loss and card damage.
Note: Some applications may require a microSDHC card to work normally or
to store data. Therefore, it is recommended that you keep a microSDHC card
installed and not remove or replace it randomly.
7