Inleiding En Kenmerken - Velleman CAMIP2 Manual Del Usuario

b. Change IP Address
• To change an IP address for a camera, select Camera>Add. An "Add Camera" dialog box will appear.
• Click on "Browse" ; the "Browse Camera" dialog box will appear.
• Click on "Search" and IPView will detect all available cameras that are installed on the LAN.
• Select the applicable camera and click on "Change IP". The "Change IP Address" dialog box will appear:
• Enter the new IP Address along with the Subnet Mask and
Default Gateway into the respective fields and click on "OK".
IPView will automatically change the IP address.
Please refer to the User Guide on the CD-ROM for detailed
information regarding the IPView application.
8. Specifications
Resolution
Sensor
Gain control
Exposure
White balance
Shutter
Minimum illumination
Focal Length
Aperture
Focus Extent
Lens mounting
Image compression
Compression rate selection
Frame rate
Frame rate setting
Video resolution
Brightness control
Contrast control
Saturation
Communication protocol
Encryption
Operating / Storage temperature 5~50°C / -15~50°C
Humidity
EMI
The information in this manual is subject to change without prior notice.
CAMIP2 – DRAADLOZE NETWERKCAMERA – 2.4GHz

1. Inleiding en kenmerken

Dank u voor uw aankoop! U kunt uw CAMIP2 zowel met kabel als draadloos gebruiken. Hij kan van op afstand
bestuurd en bekeken worden via het Internet of intranet. Lees deze handleiding grondig voor u het toestel in gebruik
neemt. Als het toestel werd beschadigd tijdens het transport, installeer het dan niet en raadpleeg uw dealer.
2. Systeemvereisten
Netwerk: Local Area Network (LAN): 10Base-T Ethernet of 100Base TX Fast Ethernet
of Wireless Local Area Network (WLAN): IEEE 802.11b Wireless LAN (Wi-Fi compatibel)
CAMIP2
640x480 pix.
1/3" colour CMOS sensor
automatic
automatic
automatic
Electronic 1/60 ~ 1/15000 sec.
2.5 lux @ f1.4, 3000L colour
6.0 mm
F=1.8
20 cm - ∞
Fixed board lens, CS-mount type
JPEG
auto
20fps@SIF, 6fps@VGA
1, 5, 7, 15, 20, auto (depends on video format)
320x240 ; 640x480
range 1 – 128
range 1 – 128
yes
HTTP, FTP, TCP/IP, UDP, ARP, ICMP, BOOTP, RARP, DHCP, PPPoE
64 bit, 128 bit or OFF
5~95% non-condensing
FCC, CE, VCCI
3 VELLEMAN