Web Configuration - Velleman CAMIP2 Manual Del Usuario

5. Web Configuration

The CAMIP2 must be configured through its built-in
configuration program.
From the web browser, enter the default IP address
(http://192.168.0.20) to enter the configuration of your CAMIP2.
The welcome screen will appear with a still image as illustrated
on the right. Select "System Administration" to configure the
Wireless Internet Camera.
6. IPView Application Installation
Insert the CD-ROM into the CD-ROM drive to initiate the auto-run program. A menu screen as follows will appear:
• The Welcome screen will appear. Click "Next" to proceed.
• The License Agreement screen will appear. Read the details carefully and press "Yes" to continue the installation.
• The next screen asks where you want to save the program. To change the proposed location, click "Browse". To
proceed, click "Next".
• The Select Program Folder screen will appear, containing information on where the IPView application will be
located. Click on "Next" to continue. To modify the settings, click "Back" to return to the previous screen.
• The InstallShield Wizard Complete screen will appear. If applicable, select "Yes, I want to restart my computer
now" and click "Finish".
7. IPView Program
a. Start Application Program
When IPView is installed, the application program is
automatically installed in Programs\Files Directory.
To start IPView, click
Start>Programs>IPView>IPView Standard.
A Login dialog box will appear. Enter the default user
name: admin in the 'User Name' field and click "OK" to
log on.
The IPView interface will appear as shown at the right.
CAMIP2
To install the IPView application, click on "IPView".
A prompt as shown below will appear. Select the desired language
and click "OK".
2 VELLEMAN