Set-Up And Use - BOJ MC-2500 Manual De Uso

Before first use
• Remove all packaging materials and do not leave the packaging material such as plastic
bags, polystyrene and elastic bands in easy reach of children as they may cause serious
injuries.
• Place the appliance on a dry, flat and stable surface such as countertop or table. There
should be at least 50cm on the top and 20cm on sides apart from the appliance to let
the air circulate around the ventilation grid to avoid inner overheating.
• Wash all accessories with a sponge damped with dishwashing liquid and rinse
thoroughly in hot water. Let it dry or wipe it with clean cloth before using the appliance.
Do not immerse the stainless steel bowl.
Using your multifunction thermal kitchen machine
1. Getting started: installing and removing the bowl
Step 1
Ensure to check the sealing ring
is well positioned onto the bottom
of the cover lid. If not, install it by
pushing it towards the bottom of
the cover lid.
Step 4
Insert the bowl onto its base with
the handle at the front facing you
and make sure it locks into place
with the Z1 part into the Z2 part.
Place the cover lid on the bowl
then push it gently into position;
the bowl is safely locked when you
cannot take it out from its base.

SET-UP AND USE

Step 2
Plug the appliance into an earthed
grounded outlet.
Step 5
Place the measuring cup onto the
cover lid, turn it clockwise until the
marking on the cup matches with
the marking on the cover lid.
- 9 -
Step 3
Place the cover lid on the bowl,
push it from top to bottom; then
turn it clockwise until its locking
position.
Step 6
To remove the bowl, press on the
release button (Z3).
English