WL 2000
• Do not leave the appliance unattended while in use.
• Fully unwind the power cord before use to prevent
overheating. Make sure that the power cord is safely
positioned. Never let it hang down from the table
edges. Make sure that the power cord does not
become a stumbling trap and that it is out of the
reach of children.
• Keep the power cord away from hot appliance parts
or other sources of heat.
• Place the appliance on a level surface that is resistant
to heat and splashes. Do not place it on a surface that
could become hot, e.g. hot plates or next to the flame
of a gas cooker. Always place it at a safe distance from
the edge of the worktop, so that it cannot fall down.
• The appliance is fitted with non-slip rubber feet.
Furniture is often coated with various varnishes and
synthetic substances and is treated with a number of
different preservative agents. Some of these products
may contain substances that corrode and soften the
rubber feet.
If necessary place an anti-slip mat under the
appliance.
• Keep flammable material away from the appliance
and do not cover it.
15