Setting The Recorder's Ip Address - Ikegami INR-Q500 Manual De Instrucciones

5-4. Setting the recorder's IP address

On the "setting" screen, modify the recorder's IP address according to the existing network
environment.
Click on "Mode" and select "Setting" on the mode menu.
On the setting menu, select "Network" first and then "IPv4".
Modify the recorder's IP address, subnet mask and other settings according to the existing
network environment.
Click on "Save". The settings will be saved and the recorder will restart itself. It takes about 90
seconds to get rebooted. Finally connect the recorder to the existing network.
E-9