Porter Cable 7812 Manual De Instrucciones página 6

8. Attach the vacuum hose to the
machine (Fig. 3). The Hose is
equipped with a bayonet style
connector. Align the projection on the
side of the Hose connector with the
slot in the Container intake port.
Slide connector into intake port and
rotate one-quarter turn clockwise to
lock.
NOTE: Models 7812 and 7814
Vacuum Cleaners are equipped
with a Static Dissipating System
that can help dissipate static electrical charges (sometimes
experienced when recovering very dry, powdered materials), when
used with a Static Dissipating type vacuum hose. The hose that
comes with your unit is NOT a static dissipating hose. To install a
Static Dissipating type hose will require removal of the bayonet
connector from the standard hose, and installation (of the bayonet
connector), onto the Static Dissipating hose, as follows:
A. Depress locking tab (A) Fig. 4A and pull collar (B) out of the
bayonet connector slightly.
B. Rotate the assembly 180° and depress the second locking tab,
allowing the bayonet connector to be separated from the hose
assembly.
C. Grasp hose in one hand and mounting hub (C) Fig. 4B in the
other. Rotate the mounting hub clockwise (left-hand thread) to
remove it from the hose.
B
B
A
Fig. 4A
Fig. 4B
6
Fig. 3
C