Aux-In Operation; Playing Records; Phonograph Recording Operation - 1 BY ONE 471NA-0002 Manual De Instrucciones

AUX-IN OPERATION

EN
1. This turntable includes an auxiliary audio signal input jack for connecting external
DE
audio devices like MP3 players, CD players, and older, non-dockable iPods so you can
listen to your external source through the turntable's speakers.
FR
2. Use an audio cable (not included) with one 3.5 mm stereo connection on each
ES end of the cable.
3. Plug one end into the AUX-IN jack on the turntable and the other end to the Line
JP
Out jack of the audio device.
4. Power on the turntable and audio device.
IT
5. The volume level can be controlled through the turntable. Operate all the functions
on the auxiliary device as usual.
6. Please note that AUX-IN function is a first-priority function. Even if the indicator
light for USB-MP3/PHONO/BT is on, these functions won't work while the AUX-IN
function is in use. Please unplug the AUX-IN cable before using the USB-MP3/
PHONO/BT functions.
7. Remove the twist-tie securing the tone arm during the shipment.
8. Release the tone arm level lock.
NOTE
1. If the Line Out jack of your external device is connected, you only need to
adjust the volume control of this system.
2. Make sure the tone arm is securely locked to avoid any damage.
3. Press STANDBY/ON button to turn off the turntable when you are done. Don't forget to
turn off the power on your external device as well.
04

PLAYING RECORDS

This turntable is full-sized, belt-driven, and plays 33, 45, and 78 RPM
records.
1. To turn the turntable on, press the STANDBY/ON button to set the volume to a low level.
2. Press the PHONO button to turn on phono mode. Please be sure that you have
removed the stylus cover from the stylus and have released the Tone arm lock.
3. Set the turntable speed switch to the appropriate speed of 33, 45 or 78 RPM. Set the
record on the turntable. If you are playing 45 RPM singles, place the 45 RPM
adapter on the center spindle.
4. Slide the AUTO STOP CONTROL switch to choose the auto stop function.
5. When finish playing the song, put the LIFT LEVER gently backward to yourself, the
tone arm gently lifter onto the record. The song will stop playing.
6. At the end of the record, the TONE ARM will stop automatically. Put the LIFT LEVER
gently backward to yourself, the TONE ARM gently lifter onto the record.
7. Adjust the VOLUME control to set the volume as desired.
8. Press the STANDBY/ON button to turn off the system when you are done.
9. Please keep the dust cover open when playing a record.

PHONOGRAPH RECORDING OPERATION

1. Place a phono record on the turntable.
2. Plug a USB disk into the USB socket. Press the PHONO-REC button, the blue LED
indicator light will flash, meaning the recording has started.
3. Press the PHONO-REC button again when you are finished recording.
4. Press the USB-MP3 button with the blue light and you will hear the recorded music
from the USB.
NOTE
1.PHONO-REC is only for phonograph recording.
2. PHONO-REC is for recording music from the phono record to a USB disk device(-
FAT32 format only).
05
EN
DE
FR
ES
JP
IT