Greenlee NC-500 NETcat Manual De Instrucciones página 8

Operation (cont'd)
Setup
With the SETUP MENU selected, the unit offers the following options:
• Length units can be selected by using the adjustment buttons as shown.
Auto shut off
• can be adjusted from NEVER to 15 minutes duration, by using the adjust-
ment buttons as shown.
UTP/STP allows the NVP* for the multi-pair test to be adjusted.
• Selecting
Coaxial allows the NVP for the single pair/coax test to be adjusted.
• Selecting
Display allows the user to change the LCD contrast level, backlight timeout, and
• Selecting
touch panel calibration.
Language allows the user to change the language used within the user interface.
• Selecting
Memo Pad allows the user to set a short note or reminder that is saved in
• Selecting
memory even when the battery is disconnected. This note is displayed each time the unit is
powered up. When the note is no longer required, it can be cleared by pressing CLR on the
touchscreen keyboard. These characters can be added by using the touchscreen keyboard.
1. Space
2. Clear screen
3. Backspace
4. Enter/CR
5. Exit
* Nominal Velocity of Propagation (NVP) is a measure of the speed that a signal travels down
a wire with respect to the speed of light.
8
1 2 3 4 5