KREAFUNK toCharge Power Bank Manual De Uso página 4

2� General Operation
Methods
2�1 Charging the toCharge
Power Bank:
Please recharge your power bank on
your computer via the USB port or with
a USB compatible wall charger (output
5V 1A). For the models with LED
indicator that can show the remaining
capacity, the details are as follows:
Indicator
1 LED flashes
1 LED on
and 1 LED flashes
2 LED on
and 1 LED flashes
3 LED on
and 1 LED flashes
4 LED on
and 1 LED flashes
6
English
Capacity
<5-10%
25%
50%
75%
100%
2�2 Charging the toCharge
Power Bank
Select a 5V USB charger or a
compatible charger (Not provided in
the box) and cable to connect your
power bank and your digital device.
The toCharge Power Bank will charge
the device automatically when the
device is connected, if not, press the
button to start charging. The LED light
that indicates the capacity left in the
power bank will flash.
2�3 For dual USB output
power bank
Connect the toCharge Power Bank
to your digital device via either Port
1 or Port 2 (depending on output
amp required) and press the power
charging.
7
English