Alba-Engine Connection To A Motor With Vdo Analogue Gauges - Albatross Alba-Engine NMEA2000 Manual De Usuario

3.3.1 Alba-Engine connection to a
motor with VDO analogue gauges
Alba-Engine can work together with analogue
motor gauges without affecting their measuring.
To make this kind of connection you will have to
follow the instructions given in the following
illustrations
3.3.1 .1 Connection to a Tachometer
For this type of connection you'll need to derive
a wire from the (orange-coloured) one marked
W in the gauge, connecting it to input number 2
in the Alba-Engine.
Figure 5. Wiring diagram of the module
to a VDO tachometer.
1.- Signal
13
+
-
2.- Ground