QEP 21643Q Manual Del Usuario página 5

• To install the blade, mount the blade and secure it by
gripping the flange with a box wrench and turning the
socket wrench counterclockwise.
TRIGGER (ON/OFF)
Your tool starts and stops by depressing and releasing
the trigger. Depressing the trigger starts the tool.
Releasing the trigger stops the tool.
DEPTH OF CUT
Loosen the wing nut on the angle plate and remove the
base up or down to the desired depth, then secure the
base by tightening the wing nut.
ANGLE OF CUT
Loosen the wing nut on the depth guide and move the
tool body to the desired angle, then secure the body by
tightening the wing nut.
OPERATING
Place the tool base on the work piece without making
contact with the blade. Start to smoothly move the tool
after turning it ON to reach maximum speed. Move the
blade slowly forward until the cut is complete and to
keep the cutting line straight.
REMOVING AND INSTALLING BLADE
Always ensure the tool is switched OFF and unplugged
before removing or installing the blade. To remove the
blade, grip the outside flange with a box wrench and
turn the socket wrench clockwise. To install, follow the
removal procedures in reverse.
REPLACING CARBON BRUSHES
Remove and check the carbon brushes regularly.
Replace when the carbon brushes are worn to about
6mm or less. Keep the carbon brushes clean to ensure
unrestricted movement in the holder. Both carbo
brushes should be replaced at the same time. Use a
screwdriver to remove the brush caps and to replace
the worn carbon brushes. Secure the brush caps after
inserting new brushes.
MaIntenance
WARNING! WHEN SERVICING, USE ONLY IDENTICAL
REPLACEMENT PARTS. USE OF ANY OTHER PARTS
MAY CREATE A HAZARD OR CAUSE PRODUCT
DAMAGE.
• Do not attempt to make any adjustments while the
tool is in operation.
• Always remove the electric cord from the power
supply before changing parts, lubricating the tool or
when working on the unit to avoid possible serious
injury.
• Keep the tool clean from accumulated dust.
IncludeS:
• Handheld Tile Saw
• 4 in. Continuous Rim Dry Diamond Blade
• Box Wrench
• Blade Socket Wrench
Warranty
IF THE PRODUCT FAILS WITHIN ONE YEAR FROM
THE DATE OF PURCHASE DUE TO A DEFECT IN
WORkMANSHIP OR MATERIAL, Q.E.P. WILL
REPAIR AND/OR REPLACE IT FREE OF CHARGE IF
THE PRODUCT IS RETURNED TO THE RETAILER/
DISTRIBUTOR WHERE IT WAS ORIGINALLY
PURCHASED. THIS WARRANTY DOES NOT COVER
NORMAL WEAR AND TEAR TO THE PRODUCT, OR
ANY DAMAGE THAT RESULTS FROM ACCIDENT,
MISUSE, ABUSE, OR NEGLIGENCE. Q.E.P.'S
OBLIGATION UNDER THIS WARRANTY IS LIMITED
TO REPAIR AND/OR REPLACEMENT OF THE
PRODUCT. LIABILITY FOR ANY INCIDENTAL OR
CONSEQUENTIAL DAMAGE OR LOSS IS SPECIFI-
CALLY EXCLUDED, AND Q.E.P. SHALL HAVE
NO LIABILITY FOR ANY SUCH INCIDENTAL OR
CONSEQUENTIAL DAMAGE. THIS WARRANTY
IS VOID IF THE PRODUCT OR ANY OF ITS
COMPONENTS ARE MODIFIED, ALTERED, OR IN
ANY WAY CHANGED, OR IF THE PRODUCT IS USED
IN A MANNER OR WITH A BLADE THAT IS NOT
RECOMMENDED BY Q.E.P. ALL ACCESSORIES ARE
EXCLUDED FROM THE WARRANTY AND SUBJECT
TO THE MANUFACTURER'S WARRANTY. IF THE
PRODUCT IS USED FOR OTHER THAN PROFES-
SIONAL PURPOSES, ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR PARTICULAR
PURPOSE IS EXCLUDED. NO EXPRESS WARRANTIES
ARE GIVEN. BUYER ASSUMES ALL RISk OF USE,
HANDLING, AND STORAGE OF THE PRODUCT NOT IN
STRICT ACCORDANCE WITH THE INSTRUCTIONS.
– 3 –