Toto TB6TR Manual De Instrucciones Y Del Propietario página 5

3) Remove the plug from the top of
the spout shank, wrap it with pipe
tape, and reinstall it.
4) Install the plaster guards on the
valve bodies and spout shank.
IMPORTANT! Do not remove
them until the deck has been
finished and the tub spout is
ready to be installed.
5) Connect the valve bodies
to the center shank with the
included flex hoses. Connect
the water supply lines (not
included) to the valve bodies.
Installation Procedure (continued)
Water Supply Lines
(not included)
Flex
Hoses
5
Plug
Plaster Guards