ORi X-zone Com Manual De Instrucciones página 37

Operating Manual X-zone Com - Configuring X-zone Com
Fig. 5.17: E-mail settings, such as SMTP server, sending and recipient addresses, sending frequency and which
alarms warrant the sending of a message between intervals.
SMTP: "SMTP" is where you make the settings required for sending e-mail and using Mcloud.
Server
User
Password
Addresses: "Address" is where you enter the sender and recipient addresses.
From
To
CC
Send interval: "Send interval" is where you can set the frequency by which the system sends e-
mails (5/10/15/30 min; 1/2/3/4/6/8/12 hrs; 1 day). Once you have saved the settings, the first e-mail will
go out at the next interval.
Mark the "Mcloud" checkbox to transmit the data to Mcloud (see the separate Mcloud user's manual).
Alarm sending: "Alarm sending" allows you to determine under which alarm circumstances your
system immediately sends an e-mail and transmits the information to Mcloud.
Test provider information and recipient addresses to see if everything functions as it should (see
Chapter 6.5). This will prompt the system to send an e-mail immediately.
NOTE
You have to transmit every setting you make once to X-zone
Com, by clicking [Upload].
Your outgoing post server
User name for e-mail access
Your password for e-mail access
Sender address (user-specified in acc. with provider specifications)
E-mail recipient (max. 1 recipient).
E-mail recipient (max. 1 copy recipient).
37